2018 Caterpillar D6T XL Dozer ~215HP ~20 Tonne 6,800 Hours SU Tilt Blade Genuine CAT MS Ripper ARO Wired Fresh 250hr Service

Make: Caterpillar | Model: D6T XL | Year: 2018 | Hours: 6,800 | Power: ~215HP | Weight: ~20t | Blade: SU Tilt | Config: XL undercarriage

A premium 2018 Caterpillar D6T XL dozer one of the most sought-after production dozers in the Australian market, and this one is configured exactly the way buyers want them. Fitted with the highly desirable SU (Semi-Universal) tilt blade for serious dozing and pushing volume, a genuine CAT MS multi-shank ripper, sweeps and rear screen, and ARO wired (Attachment Ready Option) so its set up for a plug-and-play GPS grade-control upgrade without the $5,000+ wiring cost. Powered by the proven Cat C9.3 ACERT engine with differential steering for full-power turns. Comes with a fresh 250-hour service and a comprehensive workshop inspection report, all carried out through our brand-new purpose-built facility on the Sunshine Coast QLD. This exact spec SU tilt, sweeps, rear screen, MS ripper, ARO wired is genuinely hard to find. Ready to earn from day one.

Why the SU Tilt Blade matters: The Semi-Universal (SU) blade is the production operators choice it combines the material-carrying capacity of a universal blade with the penetration and pushing power of a straight blade. Bigger loads, better material retention on the blade, and serious volume-pushing capability. Add the hydraulic tilt and you have a dozer set up to move dirt fast and grade accurately. This is the blade configuration that civil contractors and bulk earthworks operators specifically ask for. Why ARO Wired matters: This machine is Attachment Ready Option (ARO) wired from the factory meaning the wiring loom, brackets and mounts for a GPS grade-control system are already in place. When youre ready to add Trimble, Topcon or Cat grade control, its a plug-and-play upgrade rather than a costly full retrofit. That saves you $5,000-$8,000+ in wiring and installation versus a non-wired machine, and makes this dozer far more valuable to a contractor planning to run GPS.

Best Features:

SU (Semi-Universal) tilt blade the production dozers blade of choice; big loads, strong penetration, hydraulic tilt for accurate grading

Genuine CAT MS multi-shank ripper factory Cat ripper for tearing into hard ground, rock and tree roots

ARO wired (Attachment Ready Option) factory-wired for plug-and-play GPS grade-control upgrade; saves $5,000-$8,000+ vs retrofit

Sweeps and rear screen fitted ready for forestry, land clearing and the hard jobs

Cat C9.3 ACERT turbo diesel ~215HP of proven, reliable Cat power

Differential steering full power to both tracks through the turn; no power-robbing clutch-brake steering

XL undercarriage the most popular configuration in the Australian market; the right balance of flotation, stability and ground pressure for general dozing

~20 tonne operating weight serious mass for pushing power and traction

Powershift transmission smooth, productive gear changes under load

Fully enclosed EROPS cab with A/C climate controlled, dust sealed, full-day operator comfort

Grade-control ready with the ARO wiring already done, GPS is a simple bolt-on

6,800 hours sensible mid-life hours for a 2018 machine, with plenty of working life remaining

Full Specifications:

Year: 2018

Hours: 6,800

Make / Model: Caterpillar D6T XL

Engine: Cat C9.3 ACERT turbo diesel

Power: ~215 HP (gear-dependent rating)

Transmission: Powershift

Steering: Differential steering

Blade: SU (Semi-Universal) tilt blade

Ripper: Genuine CAT MS multi-shank ripper

Wiring: ARO wired (Attachment Ready Option) for GPS

Undercarriage: XL configuration

Operating weight: ~20 tonnes

Protection: Sweeps and rear screen fitted

Cab: Fully enclosed EROPS, A/C, climate control

Grade Control: ARO wired, ready for Trimble / Topcon / Cat GPS upgrade

Included with Purchase:

Fresh 250-hour service completed prior to delivery

Comprehensive workshop inspection report

All work carried out in our brand-new purpose-built workshop on the Sunshine Coast, QLD

SU tilt blade, genuine CAT MS ripper, sweeps and rear screen all fitted

ARO wiring in place for GPS grade-control upgrade

Ready to work all systems checked and operational

Australia-wide transport can be arranged

Finance options available

Ideal for: Civil contractors & bulk earthworks Subdivision & land development Dam and pad building Road and highway construction Mine site civil work Large rural and station properties Quarry operations Forestry and land clearing Owner-operators wanting a hard-to-find, GPS-ready production dozer with workshop-backed peace of mind.

Inspections welcome Makin Traks workshop, Sunshine Coast, QLD. Contact Daz Scale or email mkntraks@gmail.com to book a look.

PRICE: $435,490 including GST

Drive-away pricing available on request. Transport & finance can be arranged Australia-wide.