4.0m Heavy Duty Folding Stick Rake $10,725 including GST

New Makin Traks design Built to Australian spec Suits D3 to D6 size dozers Swing-out folding wings Makin Traks, Sunshine Coast QLD

THE ONLY SWINGING FOLDING RAKE IN THE COUNTRY PRICED UNDER $10K (before gst)
4.0m working width 14 Bisalloy 450 tynes Folds in NO PILOT REQUIRED
12-MONTH STRUCTURAL WARRANTY ON BEAM & WELDS
Our 4.0m Heavy Duty Folding Stick Rake gives you the width of a big clearing rake with none of the transport headaches. A swing-out folding wing on each side takes the rake from 3.4m to a full 4.0m working width with 14 tynes, so you cover more ground on every pass. When the jobs done, swing them back in and move the machine without a pilot vehicle. Built for D3 to D6 size dozers on a 200mm x 200mm box section main beam with 18mm wall, with Bisalloy 450 tynes, 400mm long. And at $10,725 including GST, its the only swinging folding rake in the country priced under $10K. (before gst)

STANDARD RAKE 3.4m

$9,350 including GST

3.4m working width, 12 tynes
200 x 200mm box beam, 18mm wall
Bisalloy 450 tynes, 400mm long
Complete kit, ready to fit
Approx. 900kg
Suits D3 to D6 size dozers
FOLDING RAKE 4.0m

$10,725 including GST

4.0m working width, 14 tynes
Swing-out folding wing each side
Folds in to 3.4m for transport
No pilot required
Approx. 1,050kg
Suits D3 to D6 size dozers
STEP UP FOR JUST $1,250 MORE: At 5 km/h over an 8-hour day, the extra 600mm covers up to 2.4 more hectares (approx. 6 acres) than a 3.4m rake 16.0 ha vs 13.6 ha.

WHO IT PAYS FOR

Property owners turn rough land into real value. Clearing, stick raking and windrowing is a capital improvement. Timber, regrowth and rock come out, the topsoil stays put, and country that was unusable becomes land you can graze, crop, build on or sell. A 4.0m rake on the dozer you already own gets it done faster adding maximum value to your property without paying a contractor.

Contractors more work and a better hourly rate. A dozer with a stick rake is a land-clearing machine, not just a push machine. Raking work typically commands a higher hourly rate than straight dozing, and many clearing, windrowing and site-prep jobs wont be awarded to a dozer without a rake. A 4.0m folding rake gets you the width clients want and the easy transport you need between jobs and it can pay for itself on the contracts it wins you.

PAYS FOR ITSELF IN ABOUT A WEEK: At $220/hr with the rake, the 4.0m folding rake earns back its price in about 44 machine hours just over one working week. The 3.4m rake takes about 39 hours.

IN-HOUSE FINANCE AVAILABLE

3.4m STANDARD RAKE

approx. $48 / week
$9,350 including GST
4.0m FOLDING RAKE

approx. $55 / week
$10,725 including GST

Pay it off weekly at $220/hr, $55 a week is about 15 minutes of dozer work. Indicative repayments at 8% p.a. over 4 years on the ex-GST price, no deposit or balloon. Subject to finance approval; fees and charges may apply.

WHY THIS RAKE

4.0m working width, 14 tynes more ground covered on every pass

Swing-out folding wings fold in for transport; no pilot required

200 x 200mm box section, 18mm wall a seriously stiff main beam that wont twist under load

Bisalloy 450 tynes, 400mm long high-hardness, abrasion-resistant steel that digs in, not just skims

Keeps your topsoil rakes out timber and rock while the soil falls through

Suits D3 to D6 size dozers one design across the most popular dozer classes

Complete kit arrives ready to fit; no chasing parts

Built to Australian spec made for Australian clearing conditions

Designed by a dozer dealer we sell and work on these machines every day

FITTING

This is a complete kit. The only work required is a small amount of fabrication on the back of your blade to weld on the mounting bosses the rake attaches to. Any competent fabricator can do it, or talk to us about having it done.

Working Width - 4.0m (3.4m with wings folded in)

Tynes - 14, Bisalloy 450, 400mm long

Main Beam - 200mm x 200mm box section, 18mm wall

Wings - Swing-out folding, 1 tyne each side

Transport - Fold in no pilot required

Weight - Approx. 1,050kg

Suits - D3 to D6 size dozers

Build Standard - Built to Australian spec

Warranty - 12 months on beam & factory welds. Excludes customer fitment. Conditions apply.

Supplied As - Complete kit mounting bosses fabricated onto rear of blade

4.0m FOLDING: $10,725 including GST 3.4m STANDARD: $9,350 including GST

Order now or come and see one. Tell us your dozer make and model and well confirm fitment. Freight can be arranged Australia-wide.

MAKIN TRAKS 12 Industrial Place, Yandina QLD 4561 Sunshine Coast Daz Scale mkntraks@gmail.com makintraks.com